independent rear suspension for Volkswagen Golf Mk2/Mk3 with FWD (Front-Wheel-Drive)

Most of our products in the online store are 'made on order' only. Also this item has the 'pre-order'  status and is not on stock. Currently we are running a public pre-order campaign related to the product launch, therefore this product will be available approx. 6-8 weeks after your order (last update: Mar 28th 2026).

product attributes

• independent rear suspension for Volkswagen Golf Mk2/Mk3 with Front-Wheel-Drive (FWD)
• exact copy of the Golf syncro rear suspension geometry
  
• fits your FWD model 'plug and play':
  • no replacing or cutting of the trunk floor
  • FWD fuel reservoir/tank can be carried over
  • no need to change the exhaust routing
  • rear struts/shock absorbers can be carried over
• has the same track width like the standard solid beam axle on a Golf Mk2 (respectively Golf Mk3 with 4-bolt pattern)
• can be used for bolt pattern 4x100 as well as 5x100 (only depends on the attachment parts, see information below)
• designed to use stubs and hubs of newer models Polo 9N3 and Lupo (with integrated bearing assembly)
• list of the delivery scope
  • a base frame that attaches to the original mounting points of the solid beam axle; in addition you need to drill a hole underneath the rear seats for the center support
  • two trailing arms (1x left, 1x right)
  • surface: zinc plated and powder coated for maximum corrosion protection
  • 4pcs of polyurethane bushing (stiffness 80 Sh A) incl. inner sleeves (pre-assembled in the trailing arms)
  • four excentric bolts incl. nuts and washers
  • one CFRP product tag featuring the serial number of your personal IRS kit
• required but not part of the delivery scope
  • important: check our list of OE part numbers for reference!
  • axle stubs and hubs incl. fasteners (Polo 9N3 oder Lupo)
  • brake discs, pads, calipers and caliper mounts
    
  • disc size will be 230x9mm (5x100) respectively 232x9mm (4x100)
  • disc backing plates
  • rubber brake line (caliper side)
  • if applicable: handbrake cable, ABS rotors and sensors
• will fit on
  • Golf Mk2 hatchback (FWD)
  • Jetta Mk2 (FWD)
  • Golf Mk3 hatchback (FWD)
  • Jetta Mk3 (aka Vento)
  • Golf Mk3 Convertible/Cabriolet
  • Golf Mk4 Convertible/Cabriolet
• will not fit on
  • Golf Mk2 syncro
  • Jetta Mk2 syncro
  • Golf Mk3 hatchback syncro
    
  • Golf Mk3 wagon/Variant (all versions)
    

(installation-)instructions

• it will be necessary to drill a hole underneath the rear sets to fix the center support of the frame
• for installation of the IRS it is required to open the brake lines; work on the brake system may only be done by qualified professionals
• after the installation it is necessary to do wheel alignment

restrictions of use

• Requires installation by professionals under the use of personal protective equipment.
• Not intended for road use, motorsports only.

further notes on your purchase

• you will receive a 2% discount when using the payment method bank transfer
• for deliveries outside the EU, customs duties and import taxes may apply – these are not included in the product price and must be borne by the customer
• due to size is shipping is done via carrier; shipping costs are calculated during the checkout depending on the country of destination (unfortunately shipping costs aren't available for every country at the moment - please check the "additional shipping information" tab below)
• we are happy to prepare the pallet for collection if you would like to organize the shipment yourself - our ZIP code is 74427 (GERMANY)