aluminum console to elevate the stock shifter - Renault Twingo Mk3 (X07), Smart (453)

This product is not on stock. Pre-order to make sure you will get one! Estimated time of shipping: 4 weeks after order.

product attributes

• material:
• console = aluminum 1.5mm
• intermediate plate = aluminum 4mm
• counter plates = steel 1.5mm
• changes the position of the original shifter
• by approx. 10cm in height
• by approx. 6cm to the rear of the car (in base position)
• allows horizontal adjustment (two alternative positions)
• -15mm compared to base position (equals 4,5cm effective change)
• +15mm compared to base position (equals 7,5cm effective change)
• scope of delivery:
• 1x aluminum console, pre-assembled with blind rivets and blind rivet nuts
• 1x intermediate plate
• 4x counter plates
• set of assembly material (8 bolts M6, 12 washers, 4 nuts)
• please read following installation instructions carefully

installation instructions

Slight rework on the original shifter is required (removing excessive material in the size of a bolt head).

restriction of use

Not intended for road use, motorsports only. Requires installation by professionals under the use of personal protective equipment.

important note about ZORN PURE version

Be aware that raw parts usually come with production marks and scratches from handling. As raw parts are intended for competition use, these marks and scratches cannot not be accepted as a claim reason.